nunublount0455 nunublount0455

Today at 1:25 PM
Mathematics

Answered

In ACDE, the measure of ZE=90°, the measure of ZD=12°, and EC = 5.6 feet. Find
the length of CD to the nearest tenth of a foot.

Answer :

matheusf49726 matheusf49726

Today at 1:31 PM

Answer:

Ze=90

Step-by-step explanation:

Answer Link

Other Questions

Why did the founding fathers deny certain powers to the national government state government or both?

For the axial loaded spiral circular column of diameter (300) mm, Asst=3000mm2, fc=28MPa ,fY=400MPa & a=0.85. The nominal section strength Pn is?

Why does macbeth refuse to sit in the chair that is offered to him at dinner?

Why does macbeth refuse to sit in the chair that is offered to him at dinner?

Why did the united states stay out of world war i between 1914 and 1917?

an indicator which turns pink when added to an alkali

Discuss the political implications of terrorism in India

angle ABC congruent to angle DEF. If area of angle ABC is 50cmsquare, then find the area of angle DEF

Write the sum and product of the zeroes of the polynomial 2x - 3x + 1

बेटी को क्यों सांदुर कदिनाहै?

(15 pts) A wood specimen with a cross section of 1 in. x1 in, and a span of 10 in was tested in bending by applying a load at the middle of the span. It was fou

The results of two drained tri axial tests on a saturated clay are recorded as follows: Specimen A: Chamber-confining pressure = 104 kPa Deviator stress at fail

Question 4 Estimate the 3 hour duration PMP (in mm) for a rough terrain at a point location having an Elevation Adjustment Factor of 0.95 and a Moisture Adjustm

single stage trickling filter plant consist of a primary clarifier, trickling filter 78 ft in diameter wif a 81 ft depth of random packing and a secondary clari

Design a simply supported slab for a Room size of 3.2m x 6.8m supported on 300 mm wide wall. Take live load on slab 3.0kN/m2 & Floor finish of slab 1kN/m2 .

If the shear stress at an angle of 56 degrees through the cross section of a timber beam (width 46 mm x breadth 46 mm) is 50 MPa, what is the axial tensile forc

Design a reinforced concrete beam to carry a service live load of 10kN/m and dead load of 6kN/m (including its own weight) Use f 'c = 27MPa, fy = 414MPa, b = d/

A braced column of 6 m long fixed at both ends is proposed to carry a designed load of 1500 KN. In this design, column section of 203 x 203 x 60kgm¯¹ with grade

How does the compressive strength, impact resistance and plastic shrinkage resistance of concretes are effected by increased volüme % of fibers? What advantages

When streamlines are curved pressure increases inward towards the center of curvature of the streamlines O True O False Flow is steady and non-uniform when it f