judesteph07 judesteph07

Today at 9:27 PM
English

Answered

4(x+12)=60 please can u tell me the answer

Answer :

mackishajalloh mackishajalloh

Today at 9:32 PM

Answer:

x = 3

Explanation:

12 + 3 = 15

15 x 4 = 60

(Brainliest please!!!)

Answer Link

Other Questions

Which expression is equivalent to 13x = 3? 1) 15×10 2) 12.0 3) xly 30 4) 5xsy

Activity: Multiples and Factors:Fill up the numbers given below in the table in such a way that it satisfies thearray both vertically and horizontally

Match the following:Column AColumn B1. Basic cells in the nervous tissuea. Xylemb. Neurons2. Transport of food from leaves3. Made up of dead cells4. Fluid conne

कवयित्री ज्ञानी को क्या जाने की प्रेरणा देती है? * अ) अपने -आपको जानने की ब) अपने अंदर स्थित आत्मा को जानने की स) संसार को जानने की द) उपरोक्त सभी

p/z tell me this answer

chractersketch of younger Gesseler brother

A 0.35-m³ vessel is used to store liquid propane at its vapor pressure. Safety consider- ations dictate that at a temperature of 320 K the liquid must occupy no

For liquid water the isothermal compressibility is given by: κ = c / V(P + b) where c and b are functions of temperature only. If 1 kg of water is compressed is

Calculate the molar volume of saturated liquid and the molar volume of saturated vapor by the Redlich/Kwong equation for one of the following and compare result

To what pressure does one fill a 0.15 m³ vessel at 25°C in order to store 40 kg of ethylene in it?

To a good approximation, what is the molar volume of ethanol vapor at 480⁰C and 6,000kPa ? How does this result compare with the ideal-gas value?

The vapor-phase molar volume of a particular compound is reported as 23,000 cm³·mol⁻¹ at 300 K and 1 bar. No other data are available. Without assuming ideal-ga

A rigid vessel, filled to one-half its volume with liquid nitrogen at its normal boiling point, is allowed to warm to 25 °C. Find the pressure developed in the

Estimate the mass of ethane contained in a 0.15-m³ vessel at 60° C and 14,000 kPa.

Estimate the temperature at which 40 kg of ethane stored in a 0.15-m³ vessel exerts a pressure 20,000 kPa.

PVT data may be taken by the following procedure. A mass m of a substance of molar mass M is introduced into a thermostated vessel of known total volume V. The